Diff for "City" - NEAT Portal Wiki

Diff for "City"

Differences between revisions 16 and 23 (spanning 7 versions)

The City objects can reference details about the city the script is run in.

City objects can be referenced as:

m_city.cityManager.property or city.property

The .property at the end is how you will specify which detail you are referencing. Using the table below, you can for example get the name of the city with city.name.

Properties

Property	Type	Description
buildCityLocations	array	Contains the FieldId of each coordinates scheduled for a (real) city to be built.
buildings	object	Contains information about the buildings in your city.
buffs	object	Returns an object of the current cities buffs.
Castle
checkFeastingHallSpace	Boolean	Looks to see if you have an open slot in your Feasting Hall. NOTE: Counts one spot in Hall for Training Hero if not in that town. Returns True / False
cityHasGoalErrors	Boolean	Is set to true in case if there was an exception (internal error) during goal processing OR if there are no goals at all (e.g. only comments)... i.e. simple syntax error will not set it to true...
cityNameCoords()	string	Returns the city name and (coords) in the format shown on the city tabs.
coords	String	Gives the coordinates of the city
debugMask
directionChange	Boolean	Internal bot usage only. Used by medal hunting to set to true every time army is recalled, and then it forces citymanager to do 1 cycle without auto-recalling troops from valleys. Returns: True / False
distanceSettings	Array	Returns all 5 values of DistancePolicy for the city. distanceSettings[0] through distanceSettings[4] will return the value for npc farming, npc building, medal hunting, valley acquisition, and map scanning in order.
enemyArmies	ArrayCollection	Contains information about incoming enemy armies.
estResource		(type is EstimateResource)
fields	ArrayCollection	Array of Field Objects representing fields (valleys and flats) owned by current city.
fieldId	int	fieldId of current city coords.
findHeroByName
fortification	object	Contains information about the wall defences in your city.
fortificationProduceQueue
fortificationQueueStatus	int	Tells if wall building status has started up or not. 0 = ready 1 = not ready
fortificationRequirement
friendlyArmies	object	Contains information about incoming alliance armies.
furtherInitNeeded	Boolean	Tells True / False if town has had the first focus set on a town.
GateControl	int	Shows current status of the city gates. 0 = Auto 1 = Open 2 = Closed
hasEnemyArmies
heroes	object	Contains information about the heroes in your city.
id	int	Gives the number ID of town that is ran in
incomingResources(sec)	object	Contains information about resources incoming to the city within specified time in seconds
innheroes	object	Contains information about the heroes in the inn.
innStatus	int	Returns the ready / not ready status for the inn in that town. 0 = ready 1 = not ready
mapInitState	int	Tells if map screen has loaded yet. 0 - OK 1 - pending 2 - init needed
myArmies	object	Contains information about your own armies. Same as selfArmies.
name	String	Gives the name of the town it's run in.
NumberOfRealAttacks	int	Returns the number of real (non-junk) attacks incoming to the city.
pendingProductionRates	array	?
PRFactor
researches		(array coll.)
reservedResource		(type is resource bean)
resource	object	Contains information about the resources in your city.
ResourceProduction
selfArmies	object	Contains information about your own armies. Same as myArmies.
timeSlot	int	Gives the order of towns that the bot reads from 0-X, where X = The number of towns you have starting at 0
tradesArray
TrainingHeroIsHere
trainingHeroName	String	Returns the name of the town's listed training hero.
transingTradesArray
troop	object	(object type is TroopBean)
troopQueueStatus	int	Tells if troop building status has started up or not. 0 = ready 1 = not ready
troopStillInProduction
x	int	Outputs the cities x location on the map.
y	int	Outputs the cities y location on the map.
getConfig("")	int	Outputs value of a config goal. Example: echo city.getConfig("hero") will echo the status of 'config hero' goal.
isDebugging(32768)	Boolean	Shows if script debugging is On or Off (True or False).
hasResourceForArmy()	Boolean	Shows if you have the resources to build the army specified.
rallySpotAvailable()	Boolean	Shows if you have a rally spot free. Optional parameters: (reserveSlotForTH, optional extraSlots).

Examples

//Check the status of my embassy
ifgoto (city.castle.allowAlliance) itsOpen
goto itsClosed

label itsOpen
echo "My embassy is open"
end

label itsClosed
echo "My embassy is closed"
end

ScriptObjects

City (last edited 2015-09-08 02:07:47 by Inanna)

-  ⇤ ← Revision 16 as of 2015-03-19 07:18:36 → 
  Size: 5049
  Editor: tech
  Comment:
+   ← Revision 23 as of 2015-04-17 00:46:29 → ⇥
  Size: 5340
  Editor: LKD70
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 13:
-||castle || || ||
+||buffs ||object ||Returns an object of the current cities buffs. ||
||[[Castle]] || || ||
-Line 16:
+Line 17:
+||cityNameCoords() ||string ||Returns the city name and (coords) in the format shown on the city tabs.  ||
-Line 25:
+Line 27:
-||fortification ||object? ||Contains information about the wall defences in your city. ||
+||fortification ||object ||Contains information about the wall defences in your city. ||
-Line 54:
+Line 56:
-||troop || ||(type is !TroopBean) ||
+||troop ||object ||(object type is [[troop|TroopBean]]) ||
-Line 57:
+Line 59:
-||x || || ||
||y || || ||
+||x ||int ||Outputs the cities x location on the map. ||
||y ||int ||Outputs the cities y location on the map. ||